Aluminum railings, used on stairs, walkways, decks, balconies, and porches, are highly popular with homeowners due to the slew of benefits they offer. Not only are aluminum handrails easy to install, but they are also durable, affordable, aesthetically pleasing, and require minimal maintenance.
Aluminum railing manufacturers like Weiye Aluminium design simple railing systems that come in user-friendly kits. Aluminum railing systems have everything you need, including mounting posts and screws, for easy installation with some basic tools. Below is a simple step-by-step guide on how to properly install aluminum handrails.
Choosing the Right Railing System and Considering Regulations
The most important step in installing aluminum handrails is, of course, picking the right railing system for your needs. The installation process may have some caveats depending on the type of system you opt for.
However, the installation process is somewhat similar for most handrail systems. Also, you must ensure that the railing system adheres to the relevant safety regulations in your area. It’s important to be familiar with local regulations concerning crucial aspects such as railing height.
The Right Tools for the Job
If you are a DIY person, you probably already own some of the basic tools you need to install an aluminum handrail. If not, you can easily find these tools at your local hardware store. Below are the tools you’ll need for the installation:
- Aluminum cutting blade
- Chop saw (mitre saw)
- Drill
- Level
- Square
- Tape measure
- Metal file
- Hammer
- Screwdrivers, wrenches, pliers, socket set
- Clamps or fasteners
With that covered, you can begin the installation process.
1. Install the Mounting Posts
Start by determining where you will place the mounting posts. Note that spacing is very important, and the mounting posts should be less than six feet apart. Using a tape measure and marker, place each mounting post about two inches from the edge of the walkway, stair, or deck you’re installing on. Use loose fasteners to hold the posts in place temporarily.
2. Install the Railings
Measure the distance between the mounting posts and cut the aluminum top railings about half an inch shorter than this length. Slide the railing sections you have cut into the top brackets on the mounting posts. Use the level to ensure all the mounting posts and railings are perfectly squared, then install and tighten the remaining fasteners. After installing the fasteners, double-check the mounting posts to ensure they are level and square.
Follow the same steps to install the bottom aluminum rails. Once you are done, inspect each railing and the mounting posts carefully to ensure you haven’t forgotten to insert or tighten any screws. Finally, tag on the railing system with some force to ensure it is sturdy and safe for use.
Congratulations! You have completed your DIY aluminum handrail installation. Railing installation can seem like a daunting project. However, with the right railing system and tools, it is easier than most people expect.
The steps detailed above are general guidelines for the aluminum handrail installation process. The process may differ depending on the type of railing and components in the system. Each system comes with straightforward directions that any homeowner can follow. Before starting any aluminum railing installation project, consult the included manual for specific details regarding your system.
