In the modern, fast-paced world There is automated everywhere you go. Hand dryers, automatic doors and coffee machines are just a few things that make life more convenient on a daily basis. In the workplace, automation not only makes the workday more efficient and safer, but also more effectively, and with less effort. Viper WRL Viper range of WRLs takes all the hard work out of lubrication system for industrial wires and automates the process of lubricating your wire ropes in a safe way efficiently and effectively.
The coating lubricants that you apply manually may cause a slight penetration the wire rope, but it is less likely to get the wire rope lubricated until its very core. If there isn’t enough lubrication for wire ropes and wires, abrasive wear could cause erosion of the wires and strands in the rope, which decreases the rope’s diameter, and may result in a center core failure and breakage of the inner wires.
The right lubricants for wire ropes applied through the Viper MKII Wire Rope oiler can help prevent corrosion, lessen wear in harsh conditions, and offer a longer time of service while keeping the essential performance features in place.
The Top 5 Reasons Why You Should Use Automatic Wire Rope Lubricators Include:
Cleaning and Lubricating wire ropes fast effectively, safely, and efficiently
Cleaning is crucial to ensure the integrity of wire ropes particularly in areas with a high concentration in salt-laden air. The automatic Viper WRL MKII will assist in keeping the surface of your wire ropes clear and ensure the proper lubrication of each wire that support the rope’s core. Penetrating lubricant manually is not an easy task as there’s no assurance that the grease will be absorbed into the rope’s structure. Automated lubrication of wire ropes creates a strong protection coating that is able to penetrate grease and when used in conjunction with an appropriate wire rope cleaner can clean old lubricant as well as debris from the outside of the.
Reduces downtime and increases the availability of equipment
The investment in an automated method to accomplish this will give you an enormous benefit for the workflow at your workplace, decreasing the amount of time spent on labor and making the equipment more readily available for use.
It makes lubrication of wire rope more secure
Viper Wire Rope Lubricator Viper WRL MKII wire rope oiler offers a safe and secure method for making sure that the wire ropes are lubricated in a straightforward and efficient method. The Viper WRL MKII is mounted onto the rope, which allows workers to remain at the machinery at a safe distance and reduces the risk of operation. Wire ropes are employed in harsh work situations like ships, cranes, as well as in the mining industry, and the process of maintaining oil lubrication by hand can become an hazard to safety. Automating the process, you’ll be reducing the risk.
Reduces lubricant for wire rope use
Wire ropes can fail if not lubricated with sufficient lubricant, however they could be affected by over-lubrication too. The rope must be sufficiently lubricated to remove friction and shield from the core of steel, however not too much that it causes slippage. A hand-held wire brush does not usually offer enough pressure to produce more than a substantial coating of lubricant across the rope. The automatic Viper WRL will ensure that the wire rope gets the proper amount of lubrication, while minimizing the mess and allowing it to get into the strands of rope.
