4 Types of Impedance Control PCBs

The term Impedance Control is one which is quite hard to understand for those who are new to electronic technology and its many aspects. However, if you have an idea of how different components work and how they can be integrated in a circuit then you would understand what is happening when you do not have the perfect device.

When you do not know how to handle things properly then things might get out of hand and you might end up buying something that is totally against your requirements. Thus, from the point of view of an IT professional, an impedance control PCB is the best way to create a product that is perfect in every sense.

Explanation of Concept:

First of all, you will need to understand the concept of impedance control PCB. Basically, an understanding of this concept will allow you to understand the significance of utilizing it as a controlling factor in your electronic circuit board. Basically, all electronic devices which are present in a particular circuit are powered by a source or energy.

In simple terms, this means that if you are going to use a source of power and if there are resistances in between, then the thickness of the device will determine the rate at which the energy will be consumed.

In order to create a properly functioning device, a proper input signal as well as output signal are required from the device. If this process is not followed then the device can either produce an undesirable level of energy or it can also generate an undesirable current. 

There are basically two types of devices that fall under the categories of ‘resistors’ and ‘inductors’. This is because the thickness of the printed circuit board will directly affect the measurement that is done.

Impedance Control
Explanation of Concept

So what will you be using the impedance control PCB for?

Basically, any type of electrical device that requires high current can benefit from the use of a PCB. However, it is important that you understand how these PCB’s work and what are its possible drawbacks before you begin using it in your manufactured product.

Basically, there are three types of impedance control PCB’s that are available in the market today; however, each one of these has its own advantages over the other one.

The first and foremost type of PCB is characterized by its ability to alter the characteristic impedance of a certain component. Generally, most high-frequency electric currents that arrive at a particular component are known to have high characteristic impedance. 

Impedance Control
what will you be using the impedance control PCB

Additional Attachments:

In addition to these four major types of impedance control PCB, there are also some additional features of a PCB that may be required depending upon the application. The most common of these features is the printed circuit board’s outer layer thickness.

Impedance Control
Additional Attachments

The optimum thickness of an outer layer is around 0.15 mm; a thinner outer layer may not provide the sufficient amount of thermal resistance for a given weight and size of a device.

Leave a Comment